5052 Aluminium Sheet

5052 Aluminum Sheet
5052 Aluminum Sheet

5052 Aluminum Sheet

Density: 2.68g/cm³

Available Thickness: 0.2mm-170mm

Available Width: 800mm-2250mm

Available Tempers: O/H22/H24/H32/H34/H38/H111/H112/H114

Email: sales@wdaluminium.com

Phone: +86 15324970258

5052 aluminium alloy plates are 5000 series aluminium magnesium alloy sheets. It has wide application. Especially, for your construction using, 5052 aluminum sheet is key and popular. 5052 aluminum has higher magnesium content than the 5005 aluminium alloy plates. And the strength is higher, too. Meanwhile, the 5052 aluminium has good weldability, corrosion resistance and hig fatigue strength. You can use it for marine industry because of the excellent corrosion resistance. Besides, its high fatigue strength and weldability, it is applicable for you to apply in architecture.

Properties

There are many tempers of 5052 aluminium plates in CLIMB. Different tempers has different strength. You can choose according to your requirements. The 5052 aluminium is convenient for you to weld it. Even though the elongation is lower than 3003 aluminium alloy plates, its yield and tensile strength are better.
5052 aluminium alloy is not suitable for heat treatment. For your different requirements on the hardness, we utilize annealing process for realizing different tempers. After the annealing process, the 5052 aluminium will be a better choice for you than 3003 aluminum.

5052 Aluminium Coil
5052 Aluminium Coil

Application

As a popular 5000 series aluminium alloy, aluminium 5052 alloy has excellent performance on the corrosion resistance against seawater and salt spray. For your reference, many people choose it for manufacturing tanks of the natural gas tankers. It is common for you to see the aluminium alloy 5052 on boat. Moreover, it is also widely used in construction business.

5052 Aluminium Application
5052 Aluminium Application
Available Type 5052 Aluminium Coil
Thickness 0.5mm-170mm
Width 800mm-2250mm
Common Sizes 4×8, 1250×2440, 5×10, 4×10
Common Thickness 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1mm, 1.2mm, 1.5mm, 1.6mm, 2mm, 2.5mm, 3mm, 4mm, 5mm
Available Layer PE film, Laser film
Surface Smooth, 5 Bars, Diamond, Stucco Embossed